avatar  


Recently viewed tickets

Log out

Enabling internet access for a device behind a SiteManager


Purpose


This article will provide information on how you can route traffic from the DEV side of a SiteManager to the Uplink side of the SiteManager. This can be useful if your device needs internet access or access to devices on the Uplink Side.


Information








If you need to enable internet access on a device behind the SiteManager, create a Custom > Routing (Scada) agent and select "Uplink Source Translation"

It is also possible to add a whole network by adding a "/", for example, 10.0.0.100/24 will give all addresses starting with 10.0.0. internet access.

The SCADA Address is the IP of the device you need to have internet access on.

After adding the agent, set the default gateway on the device to the IP address of the DEV port on the SiteManager - also remember to add DNS servers (in this example, we use the google DNS system)


FAQ

Troubleshoot the Routing Scada agent

Creation date: 10/12/2019 09:51 (skr@secomea.com)      Updated: 29/04/2021 11:44 (ran@secomea.com)